Mafell MT 55-18 Cordless Plunge Saw 18 V, 2 Batteries + Charger

The Mafell MT 55-18 is the cordless version of the MT 55 plunge saw, for carpenters, joiners and interior fitters who need clean, accurate cuts without a cable. Its design, functions and flat guard work together: precise cuts close to the edge with simple handling, on site or in the workshop.

Scoring function for perfect visible edges

Switch to scoring with one movement of the handle. The saw first scores the surface to a maximum of 3 mm, then automatically offsets the blade by 0.1 mm for the through-cut. Coated panels and doors get tear-free edges on both sides, as on a stationary machine, even when the rail's splinter guard is worn.

Accurate depth and bevel settings

The depth pointer always shows the exact cutting depth, with or without a rail. A fine scale in 0.1 mm steps also lets you compensate for resharpened blades. The bevel locks at two points with one clamping screw and half a turn. A -1° undercut gives tight butt joints in visible areas.

Close to the edge, low dust

The flat guard lets you cut just 8 mm from a wall or make a 10 mm shadow gap. The closed guard and adjustable protective slide keep dust low. On the rail, the lowerable slide seals against the workpiece. Connect an extractor with a 35 mm hose, or collect chips in the supplied chip bag.

Fast, safe blade change

Press the release button and lift the lever: the guard opens to its maximum angle. The switch-on lock and spindle lock engage automatically.

ErgoBalanceConcept

The centre of gravity, grip shape and red controls give better control and less fatigue, even in demanding working positions. Scales, pointers and levers sit exactly where you need them. The 48° release supports safe, precise work.

One battery for many tools (CAS)

The MT 55-18 runs on Mafell 18 V batteries and is part of the Cordless Alliance System (CAS). The batteries fit all CAS-compatible power tools from leading brands, so you need fewer battery systems on site, ideally just one.

Fits many rail systems

The rail guide is integrated in the die-cast magnesium base plate. A second guide groove and adjustable guide jaws let you use the MT 55 on the Mafell F rail system and on rails from other manufacturers.

Applications

Plunge, straight, bevel and angle cuts in chipboard, multiplex, multilayer, three-layer and OSB boards, gypsum fibre, soft fibre and fibre cement boards, laminated panels, solid wood, Plexiglas, aluminium, laminate and flooring panels. Use the matching Mafell blade for each material.

Technical data

Scope of delivery

• Mafell MT 55-18 cordless plunge saw
• Saw blade KSB-WF162 GT HM, 162 x 1.8 x 20 mm, Z49 (fine cut)
• Hex key 5 mm
• 2 x battery PowerTank 18 M 99 (18 V, 99 Wh, LiHD)
• Charger APS M+
• Chip bag
• MAX3 transport and storage case