Cordless circular saw Mafell K 55 18M bl (body only), in T-MAX case

MAFELL K 55 18M bl is a compact, powerful professional cordless hand-held circular saw for demanding woodwork and construction. 18 V Li-Ion battery technology gives great freedom of movement while retaining the precision and cutting performance typical of professional MAFELL tools.

The maximum cutting depth of K 55 18M bl is 58 mm at 90° and 48 mm at 45°. The tilt angle can be adjusted smoothly from 0–45°, so the saw suits straight, rip, bevel and plunge cuts.

No-load speed is 2450–5450 rpm, allowing cutting performance to be matched to the job and material. The saw weighs 4.3 kg, offering a good balance between mobility, stability and cutting capacity.

FLIPPKEIL plunge-cut system

A key advantage of the K 55 series is the FLIPPKEIL system, where the riving knife does not need to be removed to start a plunge cut, making plunge cutting faster, more convenient and safer.

Good visibility and control

The hinged guard can be retracted quickly with a lever, making bevel and plunge cuts easier to start. Integrated LED lights illuminate a wide work area and improve visibility of the cutting zone.

The cut indicator automatically follows the saw tilt and shows the actual cut edge precisely, helping achieve accurate results in bevel cuts too.

Efficient chip and dust extraction

Optimised chip guidance helps prevent the extraction channel clogging, including during plunge cuts along the grain. Connected to a suitable MAFELL extractor, the workplace stays cleaner and the cutting line more visible.

Guide rail compatibility

The groove in the saw base allows the use of MAFELL guide railsfor precise guided cuts and cross cuts.

CAS battery system

K 55 18M bl belongs to the Cordless Alliance System (CAS) system, allowing compatible batteries and chargers to be used in many professional cordless tools.

Applications

• Cross cuts
• Rip cuts
• Bevel cuts up to 45°
• Plunge cuts
• Cutting solid wood
• Cutting boards and beams
• Cutting panel materials
• Guided cuts with MAFELL guide rails
• Professional woodwork and joinery

Technical data

Scope of delivery

• MAFELL K 55 18M bl cordless hand-held circular saw
• TCT saw blade 168 × 1.2/1.8 × 20 mm, 24 teeth, AT, for cross-cutting wood – ref. 092478
• 5 mm hex key – ref. 093034
• Dust bag – ref. 206921

Battery and charger not included as standard.