Cross-cut system Mafell KSS 60 cc

MAFELL KSS 60 cc is a professional high-performance cross-cut system for demanding woodwork, interior finishing, installation, renovation and construction.

At the heart of the system is the powerful 1800 W CUprex motor, whose digital electronics and advanced control technology allow motor speed to be adjusted smoothly to the material and task. This ensures high cutting capacity and precise, controlled work.

KSS 60 cc combines a powerful circular saw with a permanently integrated guide rail for fast, precise cross cuts. The maximum cutting length is 408 mm , and with the guide rail the cutting depth reaches 61 mm at 0°. At 45°, the usable cutting depth across the full tilt range is 47 mm.

Without the guide rail the maximum cutting depth is 67 mm at 0° and 53 mm at 45°. The tilt angle is 0°–45°, while the rail's fixed and adjustable stops allow precise mitre cuts from -60° to +60°.

The patented FLIPPKEIL system makes plunge cutting easier and safer. No need to remove the riving knife, so recesses and cut-outs are easy to make.

After the cut the saw automatically returns to the start position. At the push of a button the saw can be removed from the cross-cut rail and used standalone, with a range of applications comparable to the K 65 cc.

The rubberised underside gives good grip on the workpiece and helps avoid surface damage. Integrated bright LED lights illuminate a large work area and improve visibility in precision work.

Applications

• cross cuts with guide rail
• rip and cross cuts
• plunge cuts
• recesses and cut-outs
• cutting doors
• cutting worktops
• solid wood
• panel materials
• insulation materials
• interior finishing
• installation and renovation work

Technical data

Scope of delivery

• MAFELL KSS 60 cc cross-cut system
• parallel guide
• M guide rail, maximum cutting length 400 mm, ref. 208170
• 5 mm hex key, ref. 093034
• HM saw blade 185 × 1.4/2.4 × 20 mm, ATB, 32 teeth, fine cut wood, ref. 092489
• 4 m power cable, ref. 087323
• in a box