MAFELL ZK 115 Ec rafter and notch cutter

MAFELL ZK 115 Ec is a special machine for routing all common notches, cuts and half-lap joints in roof and timber-frame construction. It combines high power with convenient handling and is a reliable tool for carpenters and roofers.

The powerful 3000 W motor features electronics for soft start, constant speed under load, overload protection, machine-friendly idle speed reduction and lower noise emission. The tool brake stops the cutter head quickly after switching off.

The completely updated cutter head (150 × 115 mm) has 13 carbide indexable inserts – 9 for routing and 4 for scoring – ensuring very high cutting performance, optimal chip flow and longer service life.

Setup is fast and precise: mark the notch and cutting line, set the line indicator and roof pitch, and start routing immediately. No test routing is needed, saving a great deal of time on site. Routing depth is up to 70 mm at 0° and the tilt angle is 0–60°.

The enclosing guard ensures optimal user protection. The included parallel guide helps achieve precise, repeatable work. The machine is suitable for solid wood and glulam.

MAFELL power tools are made in Germany under strict quality control.

Technical data

• Rated power: 3000 W
• Motor: universal motor, 230 V / 50 Hz
• No-load speed: 4050 rpm
• Routing depth at 0°: 0–70 mm
• Tilt angle: 0–60°
• Cutter head: Ø 150 × 115 mm, 13 carbide indexable inserts
• Power cable: 10 m
• Weight (with standard cutter head): 21.1 kg

Included

• 1 × notching cutter head, complete, Ø 150 × 115 mm (order no. 203657)
• 1 × parallel guide (order no. 203683)
• 1 × hex key 10 mm (order no. 093164)
• 1 × Torx T15 screwdriver
• 1 × power cable 10 m