MAFELL Arunda 50B Midi milling templates for dovetail joints

MAFELL Arunda is a system for manually making wood-to-wood dovetail joints in carpentry and woodworking shops. It allows straight or angled joints in load-bearing beams and rafters – both in the workshop and on site.

The Arunda 50B Midi set contains a template pair – one for the tenon and one for the mortise – in a sturdy wooden box. It is designed for tenon widths of 50–100 mm and timber heights of 90–330 mm, covering cross-sections from 40 × 90 mm to 100 × 330 mm. The B series has fixed 90° stops and a joint load capacity of up to 2100 kg.

The double-taper joint is self-locking and ensures an optimal fit. Since the same cutter setting is used for tenon and mortise, work is fast and accurate. Assembly from above is very simple – beams don't need to be pulled apart.

Use requires the MAFELL LO 65 Ec router with the special Arunda cutter and accessories. The Midi set is a good choice if you already have the router and accessories.

NOTE: The router, Arunda dovetail cutter, copying ring and other accessories are not included and must be purchased separately.

MAFELL products are made in Germany under strict quality control.

Technical data

• Tenon width in timber: 50–100 mm
• Timber height: 90–330 mm
• Cross-section: 40 × 90 to 100 × 330 mm
• Stops: fixed 90° (B series)
• Load capacity: up to 2100 kg
• Compatible with: MAFELL LO 65 Ec router

Included

• 1 × pair of templates
• 1 × wooden box