MAFELL Arunda 50B Maxi milling templates for dovetail joints

MAFELL Arunda is a system for manually making wood-to-wood dovetail joints in carpentry and woodworking shops. It allows straight or angled joints in load-bearing beams and rafters – both in the workshop and on site.

All you need is one Arunda template for the tenon and another for the mortise, plus a powerful MAFELL LO 65 Ec router with the special Arunda cutter and accessories. The Arunda 50B Maxi template set is designed for tenon widths of 50–100 mm and timber heights of 90–330 mm, covering cross-sections from 40 × 90 mm to 100 × 330 mm.

The double-taper joint is self-locking and ensures an optimal fit. Since the same cutter setting is used for tenon and mortise, work is fast and accurate. Assembly from above is very simple – beams don't need to be pulled apart.

Various template models are available, and one model can process timber of different widths and heights. The set comes in a sturdy wooden box with all necessary accessories.

NOTE: The MAFELL LO 65 Ec router is not included and must be purchased separately.

MAFELL products are made in Germany under strict quality control.

Technical data

• Tenon width in timber: 50–100 mm
• Timber height: 90–330 mm
• Cross-section: 40 × 90 to 100 × 330 mm
• Compatible with: MAFELL LO 65 Ec router

Included

• 1 × pair of templates
• 1 × dovetail cutter
• 1 × copying ring
• 1 × extension plate (order no. 093782)
• 1 × setting gauge
• 2 pairs of reversible blades
• 1 × wooden box