Cross-cut system Mafell KSS 300 MaxiMAX, in T-MAX case

MAFELL KSS 300 MaxiMAX is a professional 900 W cross-cut system combining a hand-held circular saw with the KSS guide and including the 1.4 m Flexi-Guide FX 140 guide. The system suits precise cross, bevel, mitre, plunge and rip cuts and is built for demanding woodwork, interior finishing and installation. The set comes in a compact T-MAX case.

4 key highlights

• 900 W professional power — efficient cutting in a compact system
• 300 mm cutting length — precise, repeatable cross cuts
• Flexi-Guide FX 140 — guided cuts up to 1.4 m
• 5-in-1 system — cross, rip, bevel, plunge and shadow-gap cuts

Detailed product description

MAFELL KSS 300 MaxiMAX is a compact, high-performance professional cross-cut system for demanding woodwork, interior finishing, assembly and installation. It combines a powerful hand-held circular saw with the KSS 300 guide and the 1.4 m Flexi-Guide FX 140 guide included in the MaxiMAX set.

The 900 W motor, 8800 rpm no-load speed and up to 42 mm cutting depth without the guide deliver the performance needed for professional use. With the guide, the maximum cutting depth is 40 mm at 0° and 27 mm at 45°.

The saw can be quickly removed from the KSS guide and used as a standalone hand-held circular saw. This makes the system very flexible, allowing both guided precision cuts and normal freehand cutting with one tool.

Precise cross and bevel cuts

KSS 300 is designed above all with precision and ease of use in mind. Mounting the hand-held circular saw on the KSS guide turns it into a very practical one-handed cross-cut system.

An adjustable stop and large-scale setting allow precise, repeatable mitre cuts. The mitre range is -60° to +60°, saw tilt angle 0–45°.

1.4 m Flexi-Guide included

The MaxiMAX version includes as standard a Flexi-Guide FX 140 1.4 m guide, allowing longer, precisely guided cuts when the standard short KSS guide is not enough.

The set also includes 2 clampsfor securely fixing the Flexi-Guide to the workpiece.

Compact and light

Despite its professional performance, KSS 300 is highly mobile. Die-cast magnesium parts keep the tool weight low. The saw weighs approx. 2.4 kgwithout the guide and approx. 3.0 kg.

The entire set fits into the compact T-MAX transport and storage case, making the system particularly convenient for professional on-site use.

Universal 5-in-1 cutting system

KSS 300 can be used:

• as a guided cross-cut system;
• for bevel and mitre cuts;
• for plunge cuts;
• for cutting shadow gaps and joints;
• as a hand-held circular saw with or without the guide.

The system is suitable for cutting panel materials, doors, worktops, parquet, laminate and cladding. Shadow and expansion gaps can be cut from 13 mm.

Technical data

Scope of delivery – Ref. 916702

• MAFELL KSS 300 cross-cut system
• Flexi-Guide FX 140, 1.4 m, with splinter guard
• 2 clamps for the Flexi-Guide
• TCT saw blade 120 × 1.2/1.8 × 20 mm, 40 flat/trapezoidal teeth
• Guide S, maximum cutting length 292 mm
• Parallel guide
• Dust extraction connector
• 4 mm hex key
• 4 m power cord
• T-MAX transport and storage case