Milling motor FM 1650 PV-LO

Product description:
With the FM 1650 PV-LO, MAFELL has developed another milling motor “Made in Germany”. The high quality standard and well thought-out details make the MAFELL milling motor the best partner in its performance class.
The speed can be infinitely adjusted to any application. In addition, the digital electronics are equipped with soft start, constant speed under load, idle speed reduction and overload protection.
Duo-In: The speed can be continuously adjusted to any application, either manually or via the portal interface. Additional LED status display.
Fastening is possible via the clamping collar or alternatively via direct screw connection on the portal.
The MAFELL milling motors are manufactured under the strictest quality controls in the German town of Oberndorf a. N. Before delivery, each milling motor is “run in” in a test cabin. This increases the tool life and the service life.
Highest concentricity due to the filigree coordination of all components and the fact that armature and spindle are manufactured and balanced from one piece.
The spindle can be locked via the push button or by means of an open-ended wrench at the flat areas of the spindle.
The labyrinth seal permanently protects the spindle and bearing from even the smallest particles, dust and chips.

Technical data:
Nominal power input : 1.650 W
Universal motor: 230 V / 50 Hz
Nominal No. of strokes – no load: 4.000 – 23.000 1/min
Portal connection: M8 / 4-pol.
Power supply in PV operation: 8 – 56 V
Portal control: z – 10 V
Portal mounting (drill holes): 6 x M6
Clamping collar / chuck: 43 / 8 mm
Dimensions (L x W x H): 346 x 98 x 86 mm
Noise level dB(A): 81
Weight 3,22 kg
Delivery score includes:
Delivery specification
1 Open-ended spanner
1 Mains cable 4 m (13.1 ft)
Spindle lock
External portal interface
Made in Germany
LED indication for overload